UpForLife strives to provide the very best in herbal products and customer service, there is nothing more important to us than satisfying our customers.

Every item we sell reflects our commitment to giving our customers the best quality service and value. We stand behind our 100% satisfaction guarantee, one hundred percent!

Our Guarantee to You

If you order a product and it arrives damaged or defective, we will get another one out to you right away, no questions asked.
If you find you are not satisfied with a product, for any reason whatsoever, contact us within 30 days for a refund (Less shipping and handling costs).

To make a claim under our guarantee or if you have any questions about an item you have received, simply contact us at: UPFORLIFE 3920 N.W. 7th Place Florida 32607-4810. Phone: 1-800-517-8540 (business hours only). or Email: support@upforlife.com at any time for a refund, exchange or credit.

NOTE: A 15% handling charge along with shipping costs will be deducted from refunds only.

Products

All herbal products sold on the UpForLife website are of the highest quality, manufactured in the USA or United Kingdom under the strictest government supervised manufacturing regimes

Manufacturing Regimes

PRODUCTION AND PROCESS CONTROLS Written procedures are strictly followed in production of nutritional products to ensure their identity, strength, quality and purity. In process controls have been established to assure that the product is made reproducibly and according to set specifications. Process control functions are documented at the time of performance and processing records are maintained throughout the manufacturing process.

Equipment used in the manufacture of a product are properly maintained and thoroughly cleaned according to written procedures to prevent malfunction and contamination of the product. Procedures are in-place for cleaning, set-up and operation of equipment as well as its inspection prior to use. A log of use, cleaning and maintenance is kept for each processing equipment.

To ensure batch uniformity and integrity of the product, procedures have been established for in-process testing. These control procedures include, where appropriate:

1. Appearance
2. Weight variation
3. Tablet thickness
4. Tablet hardness
5. Friability
6. Disintegration time
7. Dissolution time

In-process specifications are consistent with finished product specifications. The quality control unit may reject a product at any stage of the manufacturing process, if the purity or quality of the product is compromised. Rejected products are quarantined until an investigation of the problem is completed.

RECORDS AND REPORTS

All production and analytical records associated with a batch of a product are retained for at least one year past the expiration date of the batch. Records are also maintained for all raw materials and other components for at least one year after the expiration date of the last lot of product incorporating any of these materials or components.

1. Raw Materials: Raw materials and packaging components are purchased from reputable suppliers. A Certificate of Analysis is obtained from the supplier which is maintained by the Quality Assurance Group for at least one year past the expiration date of the product. All raw materials received are identified and checked for their physical characteristics, and identified according to the supplier label claim and the purchasing department. An inventory record is generated for each lot of material, which is used by the pharmacy to maintain a log of material use. Samples are withdrawn and submitted to QC for testing according to specifications and Standard Operating Procedures (SOP's) set forth.

2. Packaging Components and Labels: Containers, closures, cotton, seals and polyethylene bags are obtained from reputable suppliers and physically checked upon arrival for quality and specifications, using statistical sampling. Customer's labels are checked against the master label kept in locked cabinets, and are issued in the product labeling operation under strict controls. Inventory records for packaging components and labels are maintained by the packaging group.

3. Master Formula: A master formula, along with a product number, is issued for each product. The formula contains the name and strength of the product, product specifications, ingredients and the quantities to be used, as well as manufacturing instructions. The master production records also provide for recording the lot number of each material used, weight checks, the date(s) of manufacturing and production yield. 4. Lot Number and Batch Size: Upon receipt of an order, the product to be manufactured is entered in the master production book and a lot number is assigned according to standard operating procedures. The lot number consists of seven digits. The first three digits identify the month and year (i.e. 055 for May 1995), followed by three digits for sequential identification of receipt of orders. The seventh digit is usually a one and is reserved for designation of sublots (i.e. 1, 2, 3, etc.) within the same batch order. A complete lot number for example would be 055-0120. The size of each batch is determined by the production personnel according to the size of equipment to be used. Each lot or sublot thereof, is manufactured and tested under essentially the same conditions. Representative retained samples and the manufacturing records are maintained for a minimum of one year past the expiration date of the product.

5. Issuing of Batches: Upon receipt of an order, a lot number is assigned and batch folders are issued by the planning group. The batch folders include the formula, manufacturing instructions and all in-process control records to be used during manufacturing. Upon scheduling, the batch records are forwarded to the Director of Operations who releases them to the Pharmacy. All manufacturing records are filed according to product number and lot number, and maintained by the Director of Operations.

PROCEDURES AND CONTROLS

1. Pharmacy: Balances are calibrated on a daily basis and all utensils are kept clean. One ingredient is brought into the pharmacy at a time. To avoid any errors or mix-ups, all containers are labeled and placed in designated areas in the warehouse. Before withdrawal of the raw material, the containers are checked by the operator for correctness of label and receiving number. Work is initiated one batch at a time in the pharmacy following standard operating procedures of weighing and checking each raw material. Weighed batches are labeled and placed on pallets for further processing. A log book is maintained for all batches prepared by Pharmacy. Each material weighed out is subtracted from the raw material inventory record. Once a particular lot of raw material is exhausted the inventory card is forwarded to the Director of Operations for filing.

2 Mixing and Granulation: Equipment used for blending, granulation and milling are checked for cleanliness by the supervisor before use. Batches are processed following written manufacturing instructions. Upon completion, powder blends are stored in fiber or plastic drums lined with polyethylene bags, sealed, labeled, reconciled, and transferred to the staging area for either compression or encapsulation. If a product is to be reworked because of processing problems, the product is quarantined, appropriate adjustments are made to the formula and records are forwarded to the pharmacy. A log book is maintained for all batches processed by the blending group.

3. Compression/Encapsulation: The production supervisor checks the equipment for cleanliness, identifies the product to be processed and then transfers the powder blend to the designated equipment. Samples of the product are checked against a retained sample to match color and other specifications as per master formula. A sample is also sent to Quality Control for disintegration testing. If the sample meets specifications, the product is entered in the machine log book and production commences. In-process records are prepared and the capsule or tablet weight, tablet thickness and tablet hardness are recorded, as appropriate, every half-hour. Tablets are collected in polyethylene lined boxes, labeled and kept in the room until the batch is completed. Upon completion of tableting, the product is reconciled and transferred to coating or to the packaging quarantine area. Capsules are collected in polyethylene lined drums and upon completion the batch is reconciled Subsequently the capsules are deducted and sent to packaging. If a product does not meet specifications, it may be reworked as per set procedures, and batch records are updated to indicate all adjustments made to the formula and product specifications.

4. Coating: Tablets are coated soon after completion of the batch and tablets are collected in polyethylene lined boxes. Each batch is reconciled and entered in the coating log book and then forwarded to packaging for either bottling or bulk packaging. Products that are sent outside for coating are entered in a separate log book for outside services, and upon return they are reconciled and submitted to packaging.

5. Packaging: Upon completion of processing, the product is inspected by QC for appearance, broken tablets, damaged or overfilled capsules and a sample is withdrawn for testing. A product found to contain minor defects is further inspected and a determination for corrective procedures is made and effected before released for packaging. Products released by QC are either bulk packaged in polyethylene lined fiber boxes, and labeled with complete product information or bottled and labeled as per customer specifications. An expiration date, based on appropriate testing by the customer, is also printed on the finished product. Inspection and packaging records are maintained and samples are withdrawn to be retained by QC for at least one year past the expiration date of the product.

6. Sampling & Inspection: All products are manufactured using Good Manufacturing Practices and are continuously being monitored during processing to ensure product quality and integrity. The tablets are checked and tested on half-hour intervals for their physical properties and, if necessary, corrective action is taken to maintain those properties. Representative samples of 100 units are collected for both the core and the finished product for Quality Control testing, customer approval and as Reference Samples, a set for each need.

7. Storage of Finished Goods: The product shall be quarantined and stored under controlled temperature conditions until approval and shipping to the customer.

QUALITY CONTROL

Specifications, standards, and testing and operating procedures are drafted by the respective departments and approved by the Quality Control unit. Laboratory controls include the establishment of specifications for raw materials, components and finished products, and testing procedures to assure product identity, quality, strength and purity. The QC group also maintains calibration records of all instruments at suitable intervals and in addition checks conformance of all operations to the set procedures. In-process testing is performed by the QC chemists to determine whether the product being manufactured conforms to specifications. The Quality Control Unit also retains samples of raw materials (for one year past the expiration date of the last product they are used in) arid finished products (for one year past the product expiration date) are maintained under control conditions.

WHOLESALE PRICING Wholesale pricing is available to qualified distributors. For further information please feel free to call us at your convenience at:
Phone: 1-800-517-8540
You may also direct email to support@upforlife.com